: This is the total cost of making 2 full-size double-sided V-flats. You would obviously reduce the cost a lot if you only need to make 1.Many of you may think throwing together a V-Flat is fairly obvious, after all, it’s just two boards attached at the spine, right? Yes, in its base form, the design is very simple, but if you want to make them foldable, there are a couple of things I learned along the way that I think you’ll find useful. Chief among them is the ‘weave-fold’.
In the above diagram, you can see that the boards now fold both ways and I’m able to achieve this thanks to the weave-fold which essentially tapes the boards on both sides.This is where the clever bit kicks in and this is where the ‘weave’ name comes from. You essentially do exactly what I’ve shown above, but you alternate each piece of tape with which board you stick it onto first. Look at the examples below to see what I mean.
The essential part of the weave-fold is the double-side tape you use to hold both sides of the board.Taking It One Step Further… We use exactly the same technique as before; tape one side first and space out the strips by using a removable piece of tape. Then do the same on the other board and then lastly join them together.As I mentioned above, I trimmed my V-Flat down a little to make it a bit easier to use in a home studio. If you are planning on doing the same, now is the time to do it.
United States Latest News, United States Headlines
Similar News:You can also read news stories similar to this one that we have collected from other news sources.
2023 Honda Civic Type R Says Round Steering Wheels Rule | CarscoopsYou won’t find built-in shift lights or a flat-bottom rim on the newest hot hatch’s steering wheel
Source: Carscoop - 🏆 306. / 63 Read more »
Source: sdut - 🏆 5. / 95 Read more »
Source: cleantechnica - 🏆 565. / 51 Read more »
Source: verge - 🏆 94. / 67 Read more »
Source: Fashionisers - 🏆 399. / 53 Read more »
Source: BGR - 🏆 234. / 63 Read more »